R+F

High-Flow Filters for

Water & Desalination

Typical specification:1–10 µm, 40"–60", PP

Requirements & Solutions

Water treatment and desalination plants move large volumes at low pressure drop. High-flow elements reduce footprint and housing count while protecting membranes and delivering consistent water quality.

  • Drinking-water treatment and polishing
  • RO / membrane pre-filtration
  • Desalination (SWRO) pre-treatment
  • Fewer housings vs. standard 2.5" cartridges

Sub-applications

High-Flow Filters for Membrane Pre-Filtration: Selection & Specification

Protect RO/NF/UF membranes with high-flow pre-filters: micron rating, SDI reduction, absolute media and common selection pitfalls.

Learn moreHigh-Flow Filters for Drinking-Water Treatment: Selection & Specification

High-flow filtration for potable water: turbidity and particle removal, compliant media, micron rating and selection pitfalls.

Learn moreHigh-Flow Filters for Desalination (SWRO): Selection & Specification

Seawater RO pre-treatment with high-flow cartridge filters: SDI control, absolute media, seawater-compatible construction and pitfalls.

Learn more

Filtration solutions for this industry

RO Pretreatment & Membrane Protection

High-flow prefiltration protects RO membranes from suspended solids and particulate fouling. Fewer housings, lower pressure drop, longer membrane life.

View solutionDesalination (SWRO) Pretreatment

Seawater RO pretreatment with high-flow cartridge filters: remove sand, silt and colloidal particulates before the membranes. Fewer housings, robust in marine service.

View solutionWastewater Reuse & Polishing

Tertiary polishing and water-reuse filtration with high-flow cartridges: remove residual suspended solids so treated water can be safely reused or discharged.

View solutionSeawater Pre-Filtration with Duplex or FRP Housings

High-flow seawater pre-filtration in corrosion-resistant duplex 2205 or FRP housings. Real references: 2 × 700 m³/h duplex, 25 FRP housings for SWRO.

View solutionPower Plant Water Filtration

High-flow filtration for power plant make-up, cooling and service water. Real reference: compatible 3M HF740B replacement, 40" PP, 15 µm absolute, 12 m².

View solution

Application guides for this industry

In-depth pages combining a filtration task with this industry: concrete challenges, sizing factors and housing recommendations.

RO & SWRO Pre-Treatment in Water & Desalination Plants

Desalination and water-treatment plants move large volumes at low pressure drop and live or die by membrane protection. High-flow guard filtration reduces the particulate and colloidal load reaching the RO racks, controls SDI, and cuts housing count versus banks of 2.5" cartridges.

Read guide

Need filters for this application?

Tell us your requirements and we'll recommend the right filter element.

Request Quote