Europe
Stainless steel high-flow housing 5 × 40" for 150 m³/h water treatment
R+F FilterElements is an independent supplier of compatible replacement elements and housings.
Situation
A water treatment plant in Europe needed a compact housing for 150 m³/h that integrates into the existing piping with Table E flanges.
Solution
We built a 304 stainless housing for 5 × 40" elements, 10 bar design pressure, side inlet and bottom outlet. It handles 1 µm pre-filtration after the backwash filter and protects the downstream stages from particles.
Project data
| Region | Europe |
| Medium | Raw water (water treatment) |
| Quantity | 1 |
Technical parameters
| Material | 304 stainless steel |
| Configuration | 5 × 40" high-flow cartridges |
| Design pressure | 10 bar |
| Connection | DN100 Table E flanges |
| Inlet / outlet | Side in, bottom out |
| Shell | 550 mm × 3 mm |
| Surface finish | Pickled inside, shot-blasted outside |
| Filtered flow | 150 m³/h |
Process flow
- Raw water
- Backwash filter 10 µm
- R+F high-flow housing, 1 µm
- Polishing cartridge 1 µm
- UV
- Chlorination
- Outflow
More case studies